[請問] 有關金屬加工:－2016 台北日本料理推薦 , 台北日本料理吃到飽 , 台北日本料理名店 , 台北日本料理吃到飽推薦 , 台北日本料理推薦2014

Blogtrottr

批踢踢實業坊 ask 板

Disney Gifts for Everyone

Find the perfect gift for your family and friends at the Disney store. Explore merchandise of all your favorite characters.

From our sponsors

[請問] 有關金屬加工

Oct 18th 2013, 19:05, by crowKer

作者crowKer (戒菸戒一半............)

站內ask

標題[請問] 有關金屬加工

時間Fri Oct 18 19:05:23 2013

今天在整修一金屬盤面遇到的問題盤面為直徑840mm中碳鋼厚度約50mm 因為精度需求要在0.02mm之內以立式車床精修後用千分錶拖過整個盤面精度在0.002mm 可是!!!!! 隔了一個晚上後盤面外圍浮起來了外圍比圓心高約0.015mm 雖然在精度要求之內但還是想要控制在0.01mm之內方便生產加工時的精度控制 (盤面為生產加工時的治具) 請問這跟所用的刀具和切削深度(精修時一次下去0.01mm)有關嗎? 或是有沒有其他可能原因現在想破頭了 Q_Q -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 123.240.192.217

→ dacapo:我完全不懂隨便講講...熱漲冷縮造成的嗎? 10/18 19:14

→ crowKer:考慮過...不過是在空調房..室溫都控制在21~23度 10/18 19:18

This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at fivefilters.org/content-only/faq.php#publishers. Five Filters recommends:

Massacres That Matter - Part 1 - 'Responsibility To Protect' In Egypt, Libya And Syria
Massacres That Matter - Part 2 - The Media Response On Egypt, Libya And Syria
National demonstration: No attack on Syria - Saturday 31 August, 12 noon, Temple Place, London, UK

You are receiving this email because you subscribed to this feed at blogtrottr.com.

If you no longer wish to receive these emails, you can unsubscribe from this feed, or manage all your subscriptions